Enable ports on PC for Dimension10

This page will take you trough the way of enabling ports on your computer for running Dimension10.

You can read up on firewall ports in general here.

How to enable ports on your computer.


1.  Search and locate the settings for firewall and network protection. 


To open a port (or multiple ports) in your Windows firewall, you should first open your control panel and go to your windows Firewall settings tab (Brannmur og nettverksbeskyttelse) inside your security tab (Windows sikkerhet).

From here you should chose the advanced settings (avanserte innstillinger).
Windows firewall settings

2. Adding a new rule/port


You will see the firewall window shows a list of rules in the left side. From the list, select Inbound Rules (Innkommende regler), from here you can add a new rule.
Adding a new rule

3. Protocol and ports


When you have chosen "port" and pushed next you will be able to choose between TCP or UDP.

TCP 
is a connection-oriented protocol which establishes a connection between a sender and receiver before data can be sent.
UDP is a connection-less protocol, which does not establish a connection before sending data. 

Requirements for running Dimension10 - Ports enabled:

These specific ports should be enabled to smoothly run Dimension10.
Add each port as illustrated in "2. Adding a new rule/port"

TCP 80 (HTTP)
TCP 443 (HTTPS)
TCP 8000 (Update Service)
TCP 5700-5702 (Multi User Server)
UDP 3000-4000 (Multi User Server)

Var denne informasjonen hjelpsom?